Description
Features of the SL range include total control of hammer stroke and blow rate. The BSP-TEX specially designed and developed double-acting cylinder produces high impact energy from a short stroke. SL hammers are economical to operate due to the high blow rate and low hydraulic power requirement. An optional digital read-out of hammer performance is available.
Having a slim design and a width of only 784mm allows the hammers to pass between upstanding piles which includes PZ27 sections.
The hammers can be operated directly from a hydraulic crane or are available with BSP-TEX Hydropacks which conform to the latest environmental regulations.
- Total control of hammer stroke and blow rate
- Double acting cylinder produces high impact energy from a short stroke to give a high blow rate
- Slim design allows hammer to pass between upstanding piles
- Low hydraulic power requirement
- Available with BSP Hydropacks for optimum hammer performance
- Hammer can be operated directly from hydraulic crane or excavator bases
- Can drive piles with ultimate load bearing up to 2500kN
Model | SL30 |
Dropweight Mass (kg) | 2500 |
Hammer Energy (kN.m) | 30 |
Max Equivalent Stroke (m) | 1.2 |
Operating Pressure (bar) | 180 |
Hyd Oil Flow required (L/min) | 175 |
Blow Rate at rated energy (bpm) | 84 |
Basic Hammer Length (mm) | 5970 |
Basic Hammer Weight (kg) | 5950 |
Operating Mode | FS PR |
Pile Type | SP TH WP |
Maximum Pile Size (mm) | 650 |
Power Source | PP PTO |
Max Pile Bearing Capacity (kN) | 2500 |
Datasheet |
There are no reviews yet.