S 5

Additional Images

The universal worm pump for dry mix and wet mortar from a bag or silo. The S5 plastering machine is a modular system. This plastering pump is available in the TM version.   Suitable for: ground couat plasters and insulating plasters, rough cout and textured plasters, trowel plaster, adhesive bonded joint, masonry mortar, refractory mortar, sealing suspensions, injection mortar, filling and achoring mortar, dispersion plaster, fiber mortar, fibreglass concrete, bonding moratr,

Equipment features of the plastering machine S 5:

  • Large-dimensioned hopper
  • High-output variable drive
  • Control console with clear overview
  • Infinitely variable pumping rate

Standard equipment:

Set of wheels with pneumatic tyres, 20 m electrical remote control cable, operating manual, standard tools.

S5 EV
Part-no. 111 452.310

S5 EVTM
Same as S 5 EV but with pan mixer TM 100 and inflatable rubber tyres
Part-no. 111 452.330

Technical data

 

(S 5 EV)
model S 5 EV
version Basis
pump type worm pump 2L6
drive pump 5,5 kW 400 V 50 Hz
output 7-40l/min
pressure 25bar
delivery width 60m
delivery height 40m
compressor benötigter Kompressor für Spritzarbeiten > 200 l/min und für Strukturspritzarbeiten mind. 600 l/min.
engine 400 V / 50 Hz
engine power 5.5kW
supply voltage CEE-Stecker 5 x 4 mm, 32 Amp.
hopper volume 100l
weight 190kg
length 2290mm
width 680mm
height 650mm
max aggregate 6mm
pressure connection M 35
article number 111452010
(S 5 EVCM)
model S 5 EVCM
version with continuous mixer CM 928
pump type worm pump 2L6
drive pump 5,5 kW 400 V 50 Hz
output 7-40l/min
pressure 25bar
delivery width 60m
delivery height 40m
compressor benötigter Kompressor für Spritzarbeiten > 200 l/min und für Strukturspritzarbeiten mind. 600 l/min.
engine 400 V / 50 Hz
engine power 5.5kW
supply voltage CEE-Stecker 5 x 4 mm, 32 Amp.
hopper volume 100l
weight 360kg
length 2840mm
width 680mm
height 1200mm
max aggregate 6mm
pressure connection M 35
article number 111452020
(S 5 EVTM)
model S 5 EVTM
version with pan mixer TM 100
pump type worm pump 2L6
drive pump 5,5 kW 400 V 50 Hz
output 7-40l/min
pressure 25bar
delivery width 60m
delivery height 40m
compressor benötigter Kompressor für Spritzarbeiten > 200 l/min und für Strukturspritzarbeiten mind. 600 l/min.
engine 400 V / 50 Hz
engine power 5.5kW
supply voltage CEE-Stecker 5 x 4 mm, 32 Amp.
hopper volume 100l
weight 400kg
length 2290mm
width 680mm
height 1150mm
max aggregate 6mm
pressure connection M 35
article number 111452030
(S 5 EF)
model S 5 EF
version Basis
pump type worm pump 2L74
drive pump 7,5 kW 400 V 50 Hz
output 90l/min
pressure 25bar
delivery width 60m
delivery height 40m
compressor benötigter Kompressor für Spritzarbeiten > 200 l/min und für Strukturspritzarbeiten mind. 600 l/min.
engine 400 V / 50 Hz
engine power 7.5kW
supply voltage CEE-Stecker 5 x 4 mm, 32 Amp.
hopper volume 130l
weight 260kg
length 2610mm
width 680mm
height 650mm
max aggregate 8mm
pressure connection M 50
article number 111452090

* Specifications subject to change without prior notice, no responsibility is taken for the correctness of this information.

Our Product

  • High Pressure Water Cleaners
  • Hydraulic Pile Hammers
  • Concrete Batching Plants
  • Bridge Inspection Machine
  • Hydraulic Truck Cranes, Tractor Cranes and Sealand Cranes
  • Pre-stressing & Post-tensioning Accessories
  • Parts And Accessories